DCNM-LSYS Άδεια λογισμικού διακομιστή συστήματος

Commercial Type No.: DCNM-LSYS
Product No.: F.01U.287.751

DCNM-LSYS System server software license
  • Automatic device discovery
  • Controls up to 750 DICENTIS devices for participants
  • Client server solution
  • No user interaction needed to run the system
  • Dante TM inputs and outputs for floor audio
  • Overview
    PC running server software (meeting application, optional):
    Less than 100 devices & without identification or participant images Windows server 2012 R2 64 bits (including .NET Framework 3.5 feature), or: Windows server 2016 (including .NET Framework 3.5 feature).
    CPU passmarkRAMFree disk spaceEthernet card >= 6000* 8 GB 20 GB 1 GB
    Less than 100 devices with identification or participant images Windows server 2012 R2 64 bits (including .NET Framework 3.5 feature), or: Windows server 2016 (including .NET Framework 3.5 feature).
    CPU passmark:RAM:Free disk space:Ethernet card: >= 7000* 16 GB 50 GB 1 GB
    Up to 750 devices & without identification or participant images Windows server 2012 R2 64 bits (including .NET Framework 3.5 feature), or: Windows server 2016 (including .NET Framework 3.5 feature).
    CPU passmarkRAMFree disk spaceEthernet card >= 9000* 16 GB 50 GB 1 GB
    Up to 750 devices with identification or participant images Windows server 2012 R2 64 bits (including .NET Framework 3.5 feature), or: Windows server 2016 (including .NET Framework 3.5 feature).
    CPU passmarkRAMFree disk spaceEthernet card >= 10000* 16 GB 50 GB 1 GB
    PC running the meeting application only:
    Less than 100 devices & without identification or participant images Windows 8.1 Pro/Windows 10 Pro 64 bits (including .NET Framework 3.5 feature). Note: Windows 10 is only suitable for use with the client PC.
    CPU passmarkRAMFree disk spaceEthernet card >= 6000*
    8 GB
    20 GB
    1 GB
    Requirement Standard , Settings
    Gbit Ethernet IEEE802.3 , Switch latency is maximally 10µSec with Gbit.Valid for both copper and/or fiber ports.
    Packet forwarding in HW per port >1.2Mpps n.a. , If SW is responsible for packet switching, this would result in variable latency which is unacceptable.
    Quality of ServiceWith strict priority DiffServ , To make sure PTP synchronization packets and audio packets get priority over control packets.OMNEO uses QoS on IP level to avoid synchronization and audio problems on busy networks. Although the system does work without problems on relatively quiet networks (< 10% network load) it is important to configure your network switches correctly.The used QoS is Differentiated Services or DiffServ, which is part of the Type of Services field (ToS) in the IP header. For more details on DiffServ & IP header, see Wikipedia.
    Warning: IEEE802.1p is also used for QoS, but is limited to layer 2. Since OMNEO uses IP communication, this mechanism is not suitable, so make sure the used equipment uses DiffServ QoS!
    The table below gives an overview of the used DSCP values which need to be configured in the switch:
    Data DSCP dec , DSCP hex , DSCP Label , TOS byte (hex) , Switch Priority queue
    PTP sync, delay req 56 , 0x38 , CS7 , 0xE0 , Highest
    PTP follow-up, delay response, audio 46 , 0x2E , EF , 0xB8 , High
    (reserved) 8 , 0x08 , CS1 , 0x20 , Low
    Control 0 , 0x00 , Best effort , 0x00 , None
    Warning: Please check thoroughly if your switch’s highest priority queue is label as #1 or e.g. #8, because this may differ per brand. Unfortunately this is not consistent over the different brands. Setting it wrong is worse than not having priority.
    Switches must be configured to support DiffServ (DSCP) quality of service The switch needs to have 4 priority queues for the DiffServ mechanism to work.
    Warning: Never use VOIP QoS settings!
    Requirement Standard , Settings
    MAC table >1000 n.a. , To avoid the switch starts broadcasting unicast packets because it runs out of space.
    Disable EEE IEEE 802.3az , Most implementations of EEE cause problems because of implementation flaws. A good implementation should work, but does not save energy since the PTP synchronization avoids this. Therefore, EEE must always be disabled.
    Disable RSTP (when no cable loops are used) Rapid Spanning Tree Protocol (RSTP) is required when (cable) loops are created for redundancy. When no loops are created, RSTP needs to be disabled for optimal operation. When enabled, it can cause slow connections to the switch.
    Possibility to create VLANS n.a. , VLAN separation is recommended instead of IGMP snooping, because most switches are unable to handle the multicast changes in the system. Filtering multicast data may be necessary for some devices, such as 100 Mb devices (Sony cameras, TVOne, AMX, and others).
    IGMPv3 IGMPv2 snooping in hardware IGMPv3 or IGMPv2 snooping. To optimize bandwidth usage, IGMP snooping can be used. This is useful in systems with >10 multicast streams, although not absolutely required. Sufficient performance for handling a large number of IGMP query responses, depends on the number of (directly or indirectly) connected devices to that switch. Hardware support for IGMP snooping is strongly recommended.
    Requirements when Redundant wiring is used Standard , Settings
    RSTP IEEE802.1D-2004 , RSTP is used to allow the creation of loops for redundancy. The switch must support changing the following parameters to the listed values: Hello_Time = 9 seconds Forwarding_delay = 30 seconds Max_age = 22 seconds
    Diagnostics
    Link Layer discovery IEEE 802.1AB , For network diagnoses using Network Docent.
    SNMP SNMP , For network diagnoses using Network Docent.

    Images

     
  • Documents (8)
  • Software & Support (4)
 

Accessories

DCNM-LMPM Meeting preparation and manage license

DCNM-LMPM Meeting preparation and manage license

The DICENTIS Meeting Preparation and Management software module enables the prepare and manage meetings functions in the Meeting Application. Requires system license DCNM‑LSYS.

Commercial Type No.: DCNM-LMPM
Product No.: F.01U.287.752

 
DCNM-LPD Participant database license

DCNM-LPD Participant database license

DICENTIS Participant Database gives the ability to define participant’s names and assign participants to seats. Requires system licenses DCNM‑LSYS and DCNM‑LMPM.

Commercial Type No.: DCNM-LPD
Product No.: F.01U.287.754

 
 
DCNM-LMS Presenter license

DCNM-LMS Presenter license

DICENTIS Media Sharing enables the display of a remote presentation computer to be shared on all DICENTIS Multimedia devices. Requires system license DCNM‑LSYS.

Commercial Type No.: DCNM-LMS
Product No.: F.01U.287.756

 
DCNM-LCC Camera control license

DCNM-LCC Camera control license

DICENTIS Camera Control enables the use of cameras in the DICENTIS Conference system and DICENTIS Wireless system. DICENTIS Conference systems require system license DCNM LSYS.

Commercial Type No.: DCNM-LCC
Product No.: F.01U.287.755

 
 
DCNM-LSVT License for voting at 1 seat

DCNM-LSVT License for voting at 1 seat

DICENTIS software license for enabling voting at seat in the DICENTIS Multimedia, DICENTIS Discussion device with touchscreen, and DICENTIS wireless Extended. The DICENTIS Discussion device with voting has the functionality built-in.

Commercial Type No.: DCNM-LSVT
Product No.: F.01U.300.532

 
DCNM-LSID License for identification at 1 seat

DCNM-LSID License for identification at 1 seat

DICENTIS software license for enabling identification at seat in the DICENTIS Discussion device with voting, DICENTIS Discussion device with language selector, DICENTIS Discussion device with touchscreen, DICENTIS Multimedia device, and DICENTIS wireless Extended.

Commercial Type No.: DCNM-LSID
Product No.: F.01U.300.533

 
 
DCNM-LSSL License for language selector at 1 seat

DCNM-LSSL License for language selector at 1 seat

The DICENTIS Select Language at Seat license enables the language selection feature of the DICENTIS Multimedia and DICENTIS Discussion device with touchscreen. The DICENTIS Discussion device with language selector has the functionality built-in. Requires system license DCNM‑LSYS.

Commercial Type No.: DCNM-LSSL
Product No.: F.01U.300.534

 
DCNM-LVPM Voting preparation and manage license

DCNM-LVPM Voting preparation and manage license

Enables the preparation and management of voting rounds. Requires system licenses DCNM‑LSYS, DCNM‑LMPM, and DCNM‑LPD. An individual seat license (DCNM-LSVT) is required for each DICENTIS Discussion device with touchscreen and/or Multimedia device, the Meeting Application, and the API client.

Commercial Type No.: DCNM-LVPM
Product No.: F.01U.308.595

 
 
DCNM-1SMA Software maintenance agreement 1 year

DCNM-1SMA Software maintenance agreement 1 year

DICENTIS Software Maintenance Agreement for one additional year. Includes the licensed system and seat software upgrades, as well as third‑party compatible updates.

Commercial Type No.: DCNM-1SMA
Product No.: F.01U.289.628

 
DCNM-2SMA Software maintenance agreement 2 years

DCNM-2SMA Software maintenance agreement 2 years

DICENTIS Software Maintenance Agreement for two additional years. Includes the licensed system and seat software upgrades, as well as third‑party compatible updates.

Commercial Type No.: DCNM-2SMA
Product No.: F.01U.289.629

 
 
DCNM-5SMA Software maintenance agreement 5 years

DCNM-5SMA Software maintenance agreement 5 years

DICENTIS Software Maintenance Agreement for five additional years. Includes the licensed system and seat software upgrades, as well as third‑party compatible updates.

Commercial Type No.: DCNM-5SMA
Product No.: F.01U.289.630